NetApp E 系列支持包（Support Bundle）内容说明
原文：NetApp Knowledge Base · What is in an E-Series Support Bundle?（Updated: Wed, 15 Jan 2025 14:58:21 GMT）
Applies to
NetApp E-Series and EF-Series
Answer
This article describes some of the basic files/items you can find in a support bundle. The following is a list of quick descriptions of the files in a support bundle:
Note: This list is subject to constant updates and changes.
| Filename | Description |
|---|---|
asup-transmission-logs.txt | List of attempts to send ASUP messages to NetApp. Reports a 'beginning' attempt and an 'ending', such as successful or failed |
connection.txt | Displays the Drive Expansion Enclosure IDs and port connection details, shows which port connects to which port |
controller-drive-error-event-log.txt | Record of the last 100 error check conditions/errors reported by individual drives, not persistent through reboot |
core-dump-info.xml / all-coredump.xml | Metadata about the core dump, includes Capture Time, Serial numbers of controllers (as well as platform and firmware level), size of the core, and trigger reason |
cumulative-drive-vol-stats.xml | Drive and Volume statistics, such as read/write IOs, errors, and so on |
drive-command-aging-timeout.txt | Current and default settings for drive timeout values |
drive-health-data.bin | Drive health data read from the drives themselves and sent for analysis in the future using ASUP |
drive-performance-log.txt | Data from the Slow Drive Detection feature, include slow, none, idle and exempt periods |
emwdata_v04.bin | Enterprise Management Window data from SANtricity, shows which subsystems are connected |
failed-repository-analysis.txt | Displays detailed information about repository faults, including what type of fault and where it was found |
feature-bundle.txt | Shows all features on the subsystem (premium features) |
firmware-inventory.txt | Devices firmware in the system |
ib-statistics.csv | Infiniband statistics. Only collected on systems with Host Side Infiniband protocol |
io-dump-metadata.txt | Metadata for an IOC log dump. If one exists, indicates that an IOC had an issue |
io-path-statistics.7z | Displays the initiator-target-LUN nexus details on a per volume/initiator and IO shipping details |
major-event-log.txt | Copied out of SANtricity directly. It displays the date, local time, and description, event number, and event code. Each entry has a hex underneath for raw data |
iscsi-session-connections.txt | iSCSI connections. Only collected on systems with Host Side iSCSI protocol |
iscsi-statistics.csv | iSCSI Statistics. Only collected on systems with Host Side iSCSI protocol |
manifest.xml | List (manifest) of files in the support bundle/ASUP and metadata about them, such as size, time collected, and so on |
msw-runtime-info.txt | Data about the management software (SANtricity), such as OS, previous errors, firmware history, and directory location |
nvsram-data.txt | Dump of most of the NVSRAM data/settings |
Object-bundle.bin | All devices state and status in the system. - A way to read the object graph, but small bits of it |
perf-stats-daily-summary-[a | b].csv | Performance stats for each controller throughout the day broken down into minute granularity |
persistent-reservations.txt | List of SCSI reservations for multiple hosts connecting to a single volume |
pref_01.bin | Preferences file from SANtricity, includes ASUP setup information |
read-link-status.csv | Gives link errors that occurred on the Fiber Channel Loop. Fiber Channel Backend Only |
recovery-guru-procedures.html | System list of errors or concerns in a user-friendly format with suggested actions. |
recovery-profile.csv | Configuration and recent changes. This file (and a .bak backup) is also stored on the HSW system and updated with configuration changes. |
sas-phy-error-logs.csv | Errors on the SAS backend, includes invalid dwords, disparity errors, lost dword synchronization, and no dword synchronization |
soc-statistics.csv | Gives errors through "Switch on Chip". Fibre Channel Backend Only |
state-capture-data.txt | A large list of controller shell commands run against each controller. More information about the content of the state capture can be found in What is in a StateCapture as of Controller Firmware 8.20 |
storage-array-configuration.cfg | Saved configuration script to recreate the configuration of a system |
storage-array-profile.txt | Parsed limited object bundle, shows components, states, mappings, and so on. More information about the content of the state capture can be found in What is in a Storage Array Profile? |
trace-buffers.7z | Debug Queue (DQ) logs. Detailed event logs that often record more than 5 items per second. 5MB limit and support bundle only captures the most recent trace. This file needs to be parsed |
tray-component-state-capture.7z | ESM logs, include event logging comparable to DQ and state capture similar to controller state capture |
unreadable-sectors.txt | Sectors that are physically or logically unreadable (data is inaccessible) |
x-header-data.txt | Metadata about the support bundle/ASUP itself. Used to route and categorize ASUPs (same information as headers) |