Brocade 交换机清除配置（恢复出厂）命令

Commands tried by IBM FE to reset SAN Switch configuratoin

1.For switch initialization

- switchdisable

- configdefault

- reboot

Some configuration were not reset by these commands, such as IP address, Switch name, Zone configuration, etc.

2.To clear zone configuration clear

- cfgdisable
- cfgclear
- cfgsave

3.To initialize other settings

- ipaddrset

Ethernet IP Address : 10.77.77.77

Ethernet Subnetmask : 255.0.0.0

Fibre Channel IP Address [none]

Fibre Channel Subnetmask [none]

Gateway IP Address : none

DHCP [off]

- switchname "switch"
- portcfgdefault 0 (repeat for all ports)

- defzone --allaccess

- cfgsave

- snmpconfig --default (snmpv1,snmpv3)

- fwsettodefault

- fwalarmsfilterset 0

- fwconfigure --disable --port 0丂(repeat for all ports)

- userconfig --delete username

- userconfig --show -a

- timeout 10

- ifmodeset eth0